How to Create a bootable USB Memory Key

If you do not have a floppy disk drive, you may want to create a bootable USB memory key which will allow you to boot into a pure DOS environment. This can be very useful if you want to flash your BIOS. Here is a step by step procedure on how to perform this operation. NOTE: Your computer must support booting from a USB device in order to boot from the USB Memory Key. Step 1 – Download and install the Windows based HP USB Disk Format Tool. For your convenience, you can download it from HERE. Step 2 – Download the Windows 98 system files from HERE. This is a zip file that contains all of the system files that you will need. Create a new folder and extract these files into the folder that you just created. Make sure that you preserve the directory structure. Step 3 – Insert the USB Memory Key into the USB port of your computer. NOTE: Make sure that the lock/unlock switch (if present) is set to the unlock position.
	Step 4 – Launch the HP format tool program. Under the device drop down list, make sure that the USB memory key is selected.
	Step 5 – Under the file system drop down list, select FAT32. This is important to do correctly.
	Step 6 – Check the box next to Create a DOS startup disk. Select “using DOS system files located at: Then click on the square box with 3 dots on it.
	Step 7 – Browse to the folder that you extracted the Win98 system files and then click on the OK button.
	Step 8 – Now click the Start button.
	Step 9 – You will receive a warning message. Make sure you have the USB memory key selected. If you are sure, then click the Yes button.
	Step 10 – Your USB memory key is now being formated and the DOS system files will be copied onto it. Once the program has completed the operation, click on the Close button. You now have a bootable USB memory key.
	On the USB memory key, you will see these files. These are the basic Win98 system files.

Recover your software keys with SoftKey Revealer

Overview:

SoftKey Revealer, reveals the CD-Key and Serials for installed softwares on computer. It also saves your money and time, free and easy to use.

Features:

– Displays over 700 software products
– Save to Text or Word (Word XP/2003/2007 only)
– Print
– Displays for 64bit-Edition releases

Review:

If you visited my blog a couple of hours earlier you might have seen the post where i have talked about Game Key Revealer, well SoftKey Revealer is basically the same as Game Key Revealer except for software. With it you can see all the keys of the programs that you have installed in Windows and save them into a text file. It was able to sucessfuly show the key for the only commercial program that i have in Windows XP which is great! SoftKey Revealer supports over 700 software products so your favorite programs may be supported, i can’t be sure for certain tough. SoftKey Revealer is a good way of saving your software keys in case you loose them. Available for all Windows versions.

Get it at http://cakirbey.googlepages.com/softkeyrevealer